Print

NBN Changes March 2017

Written by Rivertel Admin. Posted in Rivertel News

Some fairly significant changes with your NBN service this month

We are switching over to an authenticated connection type, which means that you will need to make a couple of What is levitra used for changes in your device which is connected to the miss friendise NBN NTD.

Once you have made those changes you can swap your data connection over to the next UNID port.

Read on for more information about setting up for specific connection types.

We have also created some step by step guides here

If you experience any problems with your NBN service over the next few weeks, please contact Mike directly on

1800288871 - opt 2
This email address is being protected from spambots. You need JavaScript enabled to view it.

 

 

You have a FTTP connection with a UNIV phone
log into your router & change the connection type FROM Dynamic IP to PPPoE
enter the username & password we have sent you.
Save & reboot your router & then swap the data connection to the next UNID port

When your phone stops working, simply move your phone connection to the adjacent UNIV port.

You have a FTTP connection with no phone

log into your router & change the connection type FROM Dynamic IP to PPPoE
enter the username & password we have sent you.
Save & reboot your router & then swap the data connection to the next UNID port

 

You have a Fixed Wireless Connection with a Digital (VoIP phone)
log into your router & change the connection type FROM Dynamic IP to PPPoE
enter the username & password we have sent you.
Save & reboot your router & then swap the data connection to the next UNID port

If you have a Thomson TG797 We are sending you a new pre-configured router for your phone service to like it Retinopathy with Metformin continue working

You have a Fixed Wireless Connection with no phone

log into your router & change the connection type FROM Dynamic IP to PPPoE
enter the username & password we have sent you.
Save & reboot your router & then swap the data connection to the next UNID port

You have a Fixed Wireless Connection with traditional copper phone

log into your router & change the connection type FROM Dynamic IP to PPPoE
enter the username & password we have sent you.
Save & reboot your router & then swap the data connection to the next UNID port

There are no changes to your phone service

 

Router Types

See our Step by Step Guides here

If you have a modem/ Router with configurable EWAN port, make sure you apply these settings to the EWAN port, not the DSL connection - (thanks Ian S for that tip)

Thomson TG797

open your web browser & go to 10.0.0.138

click on network & change the settings there

 

TP-LINK (most)

open your web browser & go to 192.168.1.1
click on network & change the settings there

 

TP-LINK (some)

open your web browser & go to 192.168.0.1
click on network & change the settings there